Our organization is dedicatedly engaged in the business of offering Manual Lathe Machine that is used for cutting cylinders, circular cones, drilling, reaming a hole and cutting metric threads. These machines are fully lubricated with optimum quality oil or grease that reduce abrasion of spare parts and also save power. Our entire range is widely accredited in the market for their high durability and longer service life. Furthermore, the Manual Lathe Machine offered by us is properly packed in quality packaging material so as to ensure its safe delivery at clients' destination.
- Low power consumption
- High efficiency
- Longer functional life
- Anti-corrosive nature
MAIN USAGE OF THE CM615 PLATFORM LATHE :
The CM 615 machine tool is used for cutting metal,such as the inside and outside surface of cylinder,circular cone and end surface,lathing various metric threads,drilling and reaming and reaming a hole,it is truly the ideal equipment for lathing slim axies and spiral grooves .
THE LUBRICATING SYSTEM OF THE CM615 MACHINE TOOL :
All the friction surfaces of the machine tool parts should be completely lubricated on time so that we can ensure the reliability of the machine tool,reduce abrasion of spare parts and save power . All the parts in operation must be lubricated with No 30 oil once in every shift . The sliding parts such as big rod,tail sleeve should be lubricated once in a shift .Add No 30 machine oil to the tank in the head of the lathe till the gears below . The protecting felt of the big trail plate should be washed with kerosene oil once in a week .
|ITEM || TECHNICAL PARAMETERS |
|Gyration diameter of biggest work piece in the machine tool (mm) || 250mm |
|Largest lathering diameter on the machine body (mm) ||150 mm |
|Center height on the machine piece (mm) || 125mm |
|spinning diameter of the largest work piece on the toll carrier (mm) ||130mm |
|Diameter of spindle on drilling (mm) ||32mm |
|Taper of the spindle (mm) ||Morse 5 |
|Cutting length of the Largest work piece (mm) ||300 |
|Highest rotational speed of the Main shaft ||1500rpm |
|Taper of the Tail Stock || Morse2 |
|Appearance Dimension (LxWxH) (mm) ||1000x420x410 |